Physics, 20.11.2019 17:31, han68

Atypical machine tests the tensile strength of a sheet of material cut into a standard size of 5.00 centimeters wide by 10.0 centimeters long. the machine consists of one clamp that holds the entire width (5.00 centimeters) so that it hangs vertically. a second clamp is placed on the lower end of the object, to which a variable downward force is applied. the force is slowly increased until the object ruptures, and the breaking force is recorded.
a strip of aluminum foil with a thickness of 15.0 micrometers and matching the size recommendations of the machine is placed in the machine and tested. the force needed to rupture the foil is found to be 233 newtons.
what is the tensile strength of the aluminum foil sample?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 07:40, sanafarghal

Which lists the fundamental forces in order, from strongest to weakest? strong nuclear, weak nuclear, electromagnetic, gravitational strong nuclear, electromagnetic, weak nuclear, gravitational gravitational, weak nuclear, electromagnetic, strong nuclear electromagnetic, gravitational, strong nuclear, weak nuclear

Answers: 2

continue

Physics, 22.06.2019 11:30, azduce

(2) (a) you have a simple circuit that consists of only a battery (δvbat=1.5v) and two resistors with resistance r1=10ω and r2=5ω, connected in series with each other. what is the current running through the battery? (b) you re-arrange your circuit so now r2 is attached in parallel to r1 rather than in series. what is the current running through the battery? (c) you add an additional resistor r3=7ω on the same branch as r2. what is the current running through the battery? (d) what is the power dissipated in r3?

Answers: 3

continue

Physics, 22.06.2019 14:30, 21schraderlily

Will mark as brainliest how does a catapult increase the trajectory of an object? ps. answer as if u were a 5th grader

Answers: 1

continue

Physics, 22.06.2019 14:40, akitchen10

A5 foot by 5 foot box culvert is buried 6 feet beneath the surface of the ground. a crosssection of this very long culvert (into and out of the page) is illustrated below. assume that the soil in which the culvert is buried has the following properties: jt = 120 pcf, w = 12%, ko = 0.50, ka = 0.33, and kp = 3.00. calculate the total horizontal force per unit length of culvert (fh) felt on one of the vertical faces of the culvert.

Answers: 1

continue

Do you know the correct answer?

Atypical machine tests the tensile strength of a sheet of material cut into a standard size of 5.00...