Physics
Physics, 20.11.2019 02:31, andr8aa

The 150-mm-thick wall of a gas-fired furnace is constructed of fireclay brick (k = 1.5 w/m k, = 2600 kg/m3, cp = 1000 j/kg k) and is well insulated at its outer surface. the wall is at a uniform initial temperature of 20°c, when the burners are fired and the inner surface is exposed to products of combustion for which t[infinity] = 950°c and h = 100 w/m2 k. (a) how long does it take for the outer surface of the wall to reach a temperature of 750°c? (b) plot the temperature distribution in the wall at the foregoing time, as well as at several intermediate times.

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 03:00, ambercuevas2707
An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt, c and rt, h, and qin, as where rtot rt, c rt, h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc, n 0.05 k/w and rh, n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh, d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th, i tc, i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc
Answers: 2
image
Physics, 22.06.2019 03:50, ash011519
The force acting on a beam was measured under the same operating conditions and a sample of 5 data points was collected. this process was repeated by 3 observers. the pooled standard deviations of these 3 data sets was 1.21. determine the true mean force using all pooled data (with a 95% probability). the result should look like this: true mean = mean +/- margin of error
Answers: 1
image
Physics, 22.06.2019 15:40, caveman171
Apotter's wheel moves uniformly from rest to an angular speed of 0.20 rev/s in 32.0 s. (a) find its angular acceleration in radians per second per second. rad/s2 (b) would doubling the angular acceleration during the given period have doubled final angular speed?
Answers: 1
image
Physics, 22.06.2019 16:20, jmackenzie7
How does a circuit breaker protect a refrigerator? a. when the current is too high, a metal strip in the fuse melts and opens the circuit. b. when the resistance is too high , a re-settable which opens a circuit c. when the current is too high , a re-settable switch opens the circuit d. when the resistance is too high a metal strip in the fuse melts and opens the circuit
Answers: 2
Do you know the correct answer?
The 150-mm-thick wall of a gas-fired furnace is constructed of fireclay brick (k = 1.5 w/m k, = 2600...

Questions in other subjects: