Aparallel-plate capacitor is made of two square plates 25 cm on a side and 1.0 mm apart. the capacitor is connected to a 50.0-v battery. with the battery still connected, the plates are pulled apart to a separation of 2.00 mm. what are the energies stored in the capacitor before and after the plates are pulled farther apart? why does the energy decrease even though work is done in separating the plates?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

How does the kinetic energy of a charge change as the charge moves under the effect of an electric field from higher potential to lower potential? a. the kinetic energy increases. b.the kinetic energy decreases. c.the kinetic energy remains the same. d.the kinetic energy is always zero.

The material that keeps its new shape after it is stretched is called?