4. going back to the situation in question 1 (pipe narrows from an area of 2.0 cm2 to an area of 1.0 cm2 ; the speed of the water in the larger part of the pipe is 2.0 m/s. you already calculated the speed in the narrow part in question 1). the pipe is horizontal so the height of the water doesn’t change. suppose you measure the pressure in the larger part of the pipe to be 8,000 pa. what is the pressure in the narrow part

Na food processing facility, a spherical container of inner radius r1 5 40 cm, outer radius r2 5 41 cm, and ther- mal conductivity k 5 1.5 w/m · k is used to store hot water and to keep it at 100°c at all times. to accomplish this, the outer surface of the container is wrapped with a 800-w electric strip heater and then insulated. the temperature of the inner surface of the container is observed to be nearly 120°c at all times. as- suming 10 percent of the heat generated in the heater is lost through the insulation, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the container, (b) obtain a relation for the variation of temperature in the container material by solving the differential equation, and (c) evaluate the outer surface tempera- ture of the container. also determine how much water at 100°c this tank can supply steadily if the cold water enters at 20°c.

Jasmine is diving off a 3-meter springboard. her height in meters above the water when she is x meters horizontally from the end of the board is approximated by the equation h=-x^2+3x+3. what is the maximum height jasmine will reach on her dive?

Agas expands from an initial volume of 0.040 m^3 and an initial pressure of 210 kpa to a final volume of 0.065 m^3 while its temperature is kept constant. how much work is done by the system?