Physics
Physics, 08.11.2019 22:31, kluckey3426

Helicopter blades withstand tremendous stresses. in addition to supporting the weight of a helicopter, they are spun at rapid rates and experience large centripetal accelerations, especially at the tip. (a) calculate the magnitude (in m/s2) of the centripetal acceleration at the tip of a 3.10 m long helicopter blade that rotates at 280 rev/min. m/s2 (b) compare the linear speed of the tip with the speed of sound (taken to be 340 m/s). vtip vsound =

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:00, treytonmesser
•• al and bert are jogging side-by-side on a trail in the woods at a speed of 0.75 m/s. suddenly al sees the end of the trail 35 m ahead and decides to speed up to reach it. he accelerates at a constant rate of 0.50 m/s2, while bert continues on at a constant speed. (a) how long does it take al to reach the end of the trail? (b) once he reaches the end of the trail, he immediately turns around and heads back along the trail with a constant speed of 0.85 m/s. how long does it take him to meet up with bert? (c) how far are they from the end of the trail when they meet?
Answers: 3
image
Physics, 22.06.2019 05:30, jalexus
Thomas his older brothers, who own a junk yard, on the weekends to earn extra money. he likes to them push broken-down cars to the back of the junk yard because it makes him feel strong. last saturday, they pushed three cars with different weights, and he noticed he used different amounts of force for each one. the cars were the following weights: white car: 2,700 kg red car: 1,500 kg blue car: 2,100 kg think about how much force is needed to move each car. which correctly lists the cars in order from the most to least amount of force needed to move them? a) white, blue, red b) blue, red, white c) red, white, blue d) white, red, blue
Answers: 2
image
Physics, 22.06.2019 10:30, jeffro198004
The speed of light can be used to measure the
Answers: 1
image
Physics, 22.06.2019 15:30, tiffuuu
At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.
Answers: 1
Do you know the correct answer?
Helicopter blades withstand tremendous stresses. in addition to supporting the weight of a helicopte...

Questions in other subjects: