Ou are lowering two boxes, one on top of the other, down a ramp by pulling on a rope parallel to the surface of the ramp (fig. e5.33). both boxes move together at a constant speed of 15.0 cm> s. the coefficient of kinetic friction between the ramp and the lower box is 0.444, and the coefficient of static friction between the two boxes is 0.800. (a) what force do you need to exert to accomplish this

Apositive rod is placed to the left of sphere a, and the spheres are separated. which best describes the spheres? sphere a is negative and sphere b is positive because protons from sphere a are attracted to the rod and move to sphere b. sphere a is negative and sphere b is positive because electrons from sphere b are attracted to the rod and move to sphere a. sphere a is positive and sphere b is negative because electrons from the rod move to sphere b and protons then move to sphere a. sphere a is positive and sphere b is negative because protons move from sphere b to the rod and also to sphere a.

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.