Physics, 29.10.2019 19:31, miagiancarlo

Air enters the compressor of a gas-turbine plant at ambient conditions of 100 kpa and 25°c with a low velocity and exits at 1 mpa and 347°c with a velocity of 90 m/s. the compressor is cooled at a rate of 1500 kj/min, and the power input to the compressor is 252 kw. determine the mass flow rate of air through the compressor. (round the final answer to the nearest three decimal places.)

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 08:30, herchellann302

A40.0 l tank of ammonia has a pressure of 12.7 kpa. calculate the. volume of the ammonia if it’s pressure is changed to 8.4 kpa while its temperature remains constant.

Answers: 3

continue

Physics, 22.06.2019 17:40, kimberly01262016

The weights of bags filled by a machine are normally distributed with a standard deviation of 0.05 kilograms and a mean that can be set by the operator. at what level should the mean weight be set if it required that only 1% of the bags weigh less than 9.5 kilograms? round the answer to 2 decimal places.

Answers: 1

continue

Physics, 22.06.2019 21:30, mxrvin4977

Ineed this now one scientist feels that the changes in global climatic patterns may be good for the health of the biosphere. another scientist feels that sharp changes in climatic patterns could result in the extinction of the biosphere. which of these is the most likely reason the two scientists gave conflicting opinions on the impact of changes in the global climatic pattern? they do not have enough knowledge on the topic. they did not discuss the issue among themselves. they believe conflicting opinion strengthens science. they study different areas of science and have different scientific focuses.

Answers: 1

continue

Physics, 23.06.2019 00:40, bravomichelle75

Asteel tube (k=50 w/mk) of inner and outer diameter di = 20mm and do=26mm, respectively, is used to transfer heat from hot gases flowing over the tube (h-hot = 200w/m2k) to cold water flowing through the tube (h-cold = 8000 w/m2k). what is the cold-side overall heat transfer coefficient uc? to enhance heat transfer 16 straight fins of rectangular profile are installed longitudinally along the outer surface of the tube. the fins are equally spaced around the circumference of the tube, each having a thickness of 2mm and a length of 15mm. what is the corresponding overall heat transfer coefficient uc? *solve for uc in both cases*

Answers: 1

continue

Do you know the correct answer?

Air enters the compressor of a gas-turbine plant at ambient conditions of 100 kpa and 25°c with a lo...