Hot exhaust gases of an internal combustion engine are to be used to produce saturated water vapor at 2 mpa pressure. the exhaust gases enter the heat exchanger at 400°c at a rate of 32 kg/min while water enters at 15°c. the heat exchanger is not well insulated, and it is estimated that 10 percent of heat given up by the exhaust gases is lost to the surroundings. if the mass flow rate of the exhaust gases is 15 times that of the water, determine (a) the temperature of the exhaust gases at the heat exchanger exit and (b) the rate of heat transfer to the water. use the constant specific heat properties of air for the exhaust gases.

dicrrdirrkdirckrrdrrk ; jhgfdsgrthyjkul; i'lkjhgfdskhjl; jhgdfs

the box does not move because you need to use a force greater than 300 n. you are only using 50 n. it needs to at least be 301 n for the box to move because then it is an unbalanced force and it will move the way that the greater force is pushing it. if you use only 300 n it will be a balanced force and will not move because the force you are exerting on the   box is the same as its force.

hope this !

im sorry if i went too in depth, i am going to include a link to a video on khan academy that will explain this.   hope that you like the video and that it explains more in detail to you.

that is the link.