Physics, 25.10.2019 01:43, destinyterrea
Atwo-spindle drill simultaneously drills a ½-in hole and a ¾-in hole through a workpiece that is 1.0 in thick. both drills are twist drills with point angles of 118°. the cutting speed for the material is 300 ft/min. the rotational speed of each spindle can be set independently. the feed rate for both holes must be set to the same value because the two spindles feed at the same rate. the feed rate is set so the total metal removal rate of both drills does not exceed 1.50 in3/min. determine (a) maximum feed rate (in/min) that can be used, (b) individual feeds (in/rev) for each hole, and (c) cutting time to drill the holes.
Answers: 3
Physics, 22.06.2019 11:30, tommyaberman
You've already seen the value of 9.8 in this lesson. what's this value called? what quantity does it represent?
Answers: 2
Physics, 22.06.2019 12:30, shotocaffe
What is the power rating of the lightbulb if 3.0 a flow through it when connected to a 15 v battery
Answers: 1
Physics, 22.06.2019 14:30, sross8799
Suppose that 27 j of work is needed to stretch a spring from its natural length of 6 m to a length of 9 m. (a) how much work is needed to stretch the spring from 12 m to 14 m? j (b) how far beyond its natural length will a force of 78 n keep the spring stretched?
Answers: 2
Atwo-spindle drill simultaneously drills a ½-in hole and a ¾-in hole through a workpiece that is 1.0...
Mathematics, 24.02.2021 04:00
Mathematics, 24.02.2021 04:00
Mathematics, 24.02.2021 04:00
Mathematics, 24.02.2021 04:00
Mathematics, 24.02.2021 04:00
Mathematics, 24.02.2021 04:00