Physics, 19.10.2019 05:10, carmenala2
Standards for firewalls may be based on their thermal response to a prescribed radiant heat flux. consider a 0.25-m-thick concrete wall ( 2300 kg/m^3, 880 j/kg·k, 1.4 w/m·k), which is at an initial temperature of 25°c and irradiated at one surface by lamps that provide a uniform heat flux of 0.75·104 w/m^2. the absorptivity of the surface to the irradiation is 1.0. if building code requirements dictate that the temperatures of the irradiated and back surfaces must not exceed 325°c and 25°c, respectively, after 30 min of heating, will the requirements be met?
Answers: 3
![T( 0, 30) = 25 + \frac{2(.75\times 10^4)[\frac{(6.92\times 10^{-7} \times 1800}{\pi}]^{0.5}}{1.4} exp (\frac{-0^2}{4(6.92\times 10^{-7} \times 1800)} - \frac{(0.7\times 10^{4} 0}{k} erfc(0)](/tpl/images/0333/5681/be036.png)
![T(0.25, 30) = 25 + 213.34 [exp (\frac{0.25^2}{4\times 6.92\times 10^{-7} \times 1800})] - \frac{0.75\times 10^4(0.25)}{1.4} erfc(\frac{0.25}{2\sqrt{6.92\times 10^{-7} \times 1800}})](/tpl/images/0333/5681/b4156.png)
Other questions on the subject: Physics
Physics, 22.06.2019 11:00, victoria6929
The charge on an electron is 1.60218 × 10−19 c and its mass is 9.10939 × 10−31 kg. how strong a magnetic field must be experienced by the electron if its path is a circle of radius 5.5 cm? answer in units of t.
Answers: 3
Physics, 22.06.2019 13:40, crayons18
An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.
Answers: 2
Physics, 22.06.2019 16:30, amayareyes101
Large electric fields in cell membranes cause ions to move through the cell wall. the field strength in a typical membrane is 1.0 x 10 7 n/c. what is the magnitude of the force on a calcium ion with charge +e? what is its acceleration? is it possible for a particle with the same charge as as calcium to have a different acceleration if placed at this location? what would change the acceleration: mass of the particle? diameter of the particle?
Answers: 2
Physics, 22.06.2019 19:00, Drea1385
The particle p starts from rest at point a at time t = 0 and changes its speed thereafter at a constant rate of 2.8g as it follows the horizontal path shown. determine the magnitude and direction of its total acceleration (a) just before point b, (b) just after point b, and (c) as it passes point c. state your directions relative to the x-axis shown (ccw positive) and choose the angle with the smallest magnitude.
Answers: 1
Do you know the correct answer?
Standards for firewalls may be based on their thermal response to a prescribed radiant heat flux. co...
Questions in other subjects:
Social Studies, 18.10.2019 12:00
English, 18.10.2019 12:00
History, 18.10.2019 12:00
Social Studies, 18.10.2019 12:00
Mathematics, 18.10.2019 12:00
