a) 2.10 × 107 j
Physics, 01.10.2019 11:00, robertcoe426
The total energy of a 0.050 kg object travelling at 0.70 c is:
a) 2.10 × 107 j
b) 3.06 × 107 j
c) 2.46 × 1015 j
d) 6.30 × 1015 j
e) 8.82 × 1015 j
Answers: 1
Other questions on the subject: Physics
Physics, 22.06.2019 10:30, gyexisromero10
Air is to be preheated by hot exhaust gases in a cross-flow heat exchanger before it enters the furnace. air enters the heat exchanger at 95 kpa and 20°c at a rate of 0.6 m^3/s. the combustion gases (cp = 1.10 kj/kg°c) enter at 160°c at a rate of 0.95 kg/s and leave at 95°c. determine the rate of heat transfer to the air and its outlet temperature.
Answers: 2
Physics, 23.06.2019 02:00, meg7211
Compare the maximum rate of heat transfer to the basal metabolic rate by converting a bmr of 88 kcal/hr into watts. what is the value? from this comparison you should see why the body can accommodate a modes amount of activity in hot weather but strenuous activity would increase the metabolic rate above the body's ability to remove heat [12].
Answers: 3
Physics, 23.06.2019 02:00, jocelyn7575
Provides most of the energy used in the world today. question 4 options: wind fossil fuel moving water sunlight
Answers: 1
Physics, 23.06.2019 02:10, Nathaliasmiles
Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.
Answers: 1
Do you know the correct answer?
The total energy of a 0.050 kg object travelling at 0.70 c is:
a) 2.10 × 107 j
a) 2.10 × 107 j
Questions in other subjects:
