Physics, 15.10.2019 00:20, leoisawesome18

It is required to design a zener shunt regulator to provide a regulated voltage of about 10 v. the available 10-v, 1-w zener of type 1n4740 is specified to have a 10-v drop at a test current of 25 ma. at this current, its r z is 7 . the raw supply, v s , available has a nominal value of 20 v but can vary by as much as ±25%. the regulator is required to supply a load current of 0 ma to 20 ma. design for a minimum zener current of 5 ma.

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 03:00, chastynpatrick

If it takes a planet 2.8 x 10^8 s to orbit a star with a mass of 6.2 x 10^30 kg what is the average distance between the planet and the star

Answers: 3

continue

Physics, 22.06.2019 05:50, charlesrogers38

There are two routes similar in terrain; however, one route has an incline of approximately 28 degrees, and you must decide on which route to take. what is the maximum road grade that your fully loaded ecv can climb?

Answers: 2

continue

Physics, 22.06.2019 15:00, rosehayden21

A10 kg box initially at rest is pulled 18 meters across a horizontal, frictionless surface by a 40 n force. what is the block’s final velocity over the 18 meters?

Answers: 2

continue

Physics, 22.06.2019 18:00, Zaydblackwood06

The photo shows sugar dissolved into a solution with excess sugar at the bottom of the jar this type of solution is classified as a. unsaturated b. compound c. saturated d. plasma

Answers: 1

continue

Do you know the correct answer?

It is required to design a zener shunt regulator to provide a regulated voltage of about 10 v. the a...