"a short-wave radio antenna is supported by two guy wires, 150 ft and 170 ft long. each wire is attached to the top of the antenna and anchored to the ground at two anchor points on opposite sides of the antenna. the shorter wire makes an angle of 65° with the ground. how far apart are the anchor points?

The anchor points are 78.37 ft and 111.99 ft

Explanation:

If you look at the attached (Fig 1) you will find that the union of antenna and its guy wires forms two right triangles. To solve problems that involve this kind of triangles, you can apply trigonometric functions (sine, cosine, etc) and Pythagoras Theorem. Trigonometric functions states the relation between angles, sides and hypotenuse of a right triangle. If you look Fig2, considering α angle, "b" is the opposite side, "a" the adjacent side and "c" the hypotenuse. Then

a) Sine (α) = b/c it means opposite side/hypotenuse

b) Cosine (α)= a/c, it means adjacent side/hypotenuse

c) Tangent (α) = b/a opposite side/adjacent side.

Pythagoras theorem states that if you called "a" and "b", the sides of the right triangle, and "c" the hypotenuse, then:

                                      a² + b² = c²    

As the problem states the lengths 150 ft and 170 ft represents the value of the hypotenuse of each triangle and 65° is one of the angles of the triangle with 150 ft hypotenuse. So you can solve this using sin (65°) to find the height of the antenna (h) and then the two distances (x and y,).

Sine (65°) = h/ 150 ft ⇒ Sine (65°) x 150ft = h ⇒ h = 127.9 ft.

To find x : Cosine (65°) = x/ 150 ft ⇒ Cosine (65°) x 150 ft = x

⇒ x = 78.37 ft.

And finally, to find y we can apply Pythagoras theorem

(170 ft)² = (127.9 ft)² + y² ⇒ y² = (170 ft)² - (127.9 ft)² ⇒ y = 111.99 ft

Summarizing, the anchor points are 78.37 ft and 111.99 ft

force is based upon mass and acceleration.the statement is not always true.

it can be explained from newton's second law of motion.

as per newton's second law of motion the rate of change of momentum is directly proportional to the applied force and takes place along the direction of force.

mathematically it can be written as -

                                              ⇒      

here   k is the proportionality constant whose value is 1.

                                                            [a is the acceleration=dv/dt]

hence we see that force not only depends on mass and acceleration but also on velocity and rate of change of mass. force f will depend on mass and acceleration only when mass is constant.

hence the statement that force is based upon mass and acceleration is false.