The rectangular bar is connected to the support bracket with a 20-mm-diameter pin. the bar width is w = 65 mm and the bar thickness is 20 mm. each side of the bracket has the same dimensions as the bar. the average shear stress in the pin cannot exceed 130 mpa, the bearing stress in the bar cannot exceed 150 mpa, and the bearing stress in the bracket cannot exceed 140 mpa. determine the maximum value of pmax that can be supported by the structure.

Acar travels along a highway with a velocity of 24 m/s, west. the car exits the highway; and 4.0 s later, its instantaneous velocity is 16 m/s, 45° north of west. what is the magnitude of the average acceleration of the car during the four-second interval?

Na food processing facility, a spherical container of inner radius r1 5 40 cm, outer radius r2 5 41 cm, and ther- mal conductivity k 5 1.5 w/m · k is used to store hot water and to keep it at 100°c at all times. to accomplish this, the outer surface of the container is wrapped with a 800-w electric strip heater and then insulated. the temperature of the inner surface of the container is observed to be nearly 120°c at all times. as- suming 10 percent of the heat generated in the heater is lost through the insulation, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the container, (b) obtain a relation for the variation of temperature in the container material by solving the differential equation, and (c) evaluate the outer surface tempera- ture of the container. also determine how much water at 100°c this tank can supply steadily if the cold water enters at 20°c.

Which notation is used to represent an alpha particle? a. b. c. d.