Physics, 06.10.2019 09:02, thechef129
For a particular casting setup, the top of the sprue has a diameter of 0.030 m, and its length is 0.200 m. the volume flow rate of metal into the mold is 0.03 m3 /min. what is the resultant velocity at the bottom of the sprue? also, what diameter should be specified at the bottom of the sprue to prevent air aspiration? what is the reynolds number at the bottom of the sprue. is the flow laminar or turbulent? assume the pressure at the top and bottom of the sprue is atmospheric pressure. viscosity of the metal used is 0.004 n. s / m2. density of the metal is 2700 kg/ m3 .
Answers: 3
Physics, 22.06.2019 00:40, naomicervero
The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.
Answers: 1
Physics, 22.06.2019 18:30, sarinaneedshelp01
A1000-kg car is moving at 30 m/s around a horizontal unbanked curve whose diameter is 0.20 km. what is the magnitude of the friction force required to keep the car from sliding?
Answers: 3
For a particular casting setup, the top of the sprue has a diameter of 0.030 m, and its length is 0....
English, 29.04.2021 01:50
Mathematics, 29.04.2021 01:50
Physics, 29.04.2021 01:50
Spanish, 29.04.2021 01:50
History, 29.04.2021 01:50