Physics
Physics, 24.09.2019 03:30, fluffyunicorn59803

Steam in a heating system flows through tubes whose outer diameter is 5 cm and whose walls are maintained at a temperature of 130°c. circular aluminum alloy 2024-t6 fins (k = 186 w/m⋅k) of outer diameter 6 cm and constant thickness 1 mm are attached to the tube. the space between the fins is 3 mm, and thus there are 250 fins per meter length of the tube. heat is transferred to the surrounding air at t[infinity] = 25°c, with a heat transfer coefficient of 40 w/m2⋅k. determine the increase in heat transfer from the tube per meter of its length as a result of adding fins.

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:40, cookies1164
Ablock of mass m = 2.5 kg is attached to a spring with spring constant k = 710 n/m. it is initially at rest on an inclined plane that is at an angle of θ = 23° with respect to the horizontal, and the coefficient of kinetic friction between the block and the plane is μk = 0.19. in the initial position, where the spring is compressed by a distance of d = 0.16 m, the mass is at its lowest position and the spring is compressed the maximum amount. take the initial gravitational energy of the block as zero. a) what is the block's initial mechanical energy? b) if the spring pushes the block up the incline, what distance, l, in meters will the block travel before coming to rest? the spring remains attached to both the block and the fixed wall throughout its motion.
Answers: 3
image
Physics, 22.06.2019 15:00, koranbutterton
Astudent throws a water balloon with speed v0 from a height h = 1.76 m at an angle θ = 21° above the horizontal toward a target on the ground. the target is located a horizontal distance d = 9.5 m from the student’s feet. assume that the balloon moves without air resistance. use a cartesian coordinate system with the origin at the balloon's initial position. (a) what is the position vector, rtarge t, that originates from the balloon's original position and terminates at the target? put this in terms of h and d, and represent it as a vector using i and j. (b) in terms of the variables in the problem, determine the time, t, after the launch it takes the balloon to reach the target. your answer should not include h. (c) create an expression for the balloon's vertical position as a function of time, y(t), in terms of t, vo, g, and θ. (d) determine the magnitude of the balloon's initial velocity, v0, in meters per second, by eliminating t from the previous two expressions.
Answers: 3
image
Physics, 22.06.2019 17:40, tylercapozzoli
Scientists follow specific processes in order to determine valid explanations and conclusions from observations. david observed strange lights in the sky above his home outside of roswell, new mexico. the only explanation that makes sense to him is that there are ufos in the area. what should david do next to verify his explanation?
Answers: 1
image
Physics, 22.06.2019 18:00, mariaaaaa69
Astudent pushes a 60-n block across the floor for a distance of 10 m. how much work was done to move the block
Answers: 1
Do you know the correct answer?
Steam in a heating system flows through tubes whose outer diameter is 5 cm and whose walls are maint...

Questions in other subjects:

Konu
Engineering, 18.03.2020 14:09
Konu
English, 18.03.2020 14:19