Physics, 13.09.2019 03:30, farhansayeed11

Three wooden planks are fastened together by a series of bolts to form a column. the diameter of each bolt is 12-mm and the inner diameter of each washer is 16-mm, which is slightly larger than the diameter of the holes in the planks. determine the smallest allowable outer diameter d of the washers, knowing that the average normal stress in the bolts is 35 mpa and that the bearing stress between the washers and the planks must not exceed 8.5 mpa.

Answers: 2

Show answers

Answers

answered: Guest

an energy transformation flow diagram is shown

where is it ?

answered: Guest

russian is not my first language, so i'm afraid i can't write out an answer in russian, but hopefully you can find a way to do so. here's my best translation of the problem: you're given a plot of a particle's position in one-dimensional space over time, and you're asked to find either the total distance traveled by the particle after 6 seconds had elapsed, or the total displacement of the particle after 6 seconds.

if you want the total distance traveled, you would first need to determine the particle's velocity as a function of time, then integrate that over the 6-second interval. we know the position function is quadratic with roots at 0 and 6, so we have

$x(t)=ax(x-6)$

where $a$ is unknown. because the position is parabolic, there is symmetry about the midpoint at $t=3$ , and we know that

$x(3)=10\implies -9a=10\implies a=-\dfrac{10}9$

so that the position function is

$x(t)=-\dfrac{10}9x(x-6)$

which means the velocity is

$v(t)=\dfrac{\mathrm dx}{\mathrm dt}=-\dfrac{20}9x+\dfrac{60}9$

then the total distance traveled is

$\displaystyle\int_{t=0}^{t=6}|v(t)|\,\mathrm dt=\left\{\int_{t-0}^{t=3}-\int_{t=3}^{t=6}\right\}v(t)\,\mathrm dt=20$

so the total distance traveled is 20 m.

on the other hand, if you want to find displacement: the particle starts at $x=0$ and ends at $x=0$ , so its displacement is 0.

answered: Guest

force is based upon mass and acceleration.the statement is not always true.

it can be explained from newton's second law of motion.

as per newton's second law of motion the rate of change of momentum is directly proportional to the applied force and takes place along the direction of force.

mathematically it can be written as -

$f\alpha \frac{dp}{dt}$

⇒ $f= k \frac{dp}{dt}$

here k is the proportionality constant whose value is 1.

$f=\frac{dp}{dt}$

$f= \frac{d[mv]}{dt}$

$f= m\frac{dv}{dt} +v\frac{dm}{dt}$

$f=ma+v\frac{dm}{dt}$ [a is the acceleration=dv/dt]

hence we see that force not only depends on mass and acceleration but also on velocity and rate of change of mass. force f will depend on mass and acceleration only when mass is constant.

hence the statement that force is based upon mass and acceleration is false.

answered: Guest

Ithink it’s b hope it