Physics, 11.09.2019 01:10, ToriChristine

According to archimedes’ principle, the mass of a floating object equals the mass of the fluid displaced by the object. use this principle to solve the following problems. (a) a wooden cylinder 30.0 cm high floats vertically in a tub of water (density 1: 00 g/cm3). the top of the cylinder is 13.5 cm above the surface of the liquid. what is the density of the wood? (b) the same cylinder floats vertically in a liquid of unknown density. the top of the cylinder is 18.9 cm above the surface of the liquid. what is the liquid density? (c) explain why knowing the length and width of the wooden objects is unnecessary in solving parts (a) and (b). 2.15.

Answers: 1

Show answers

Answers

answered: AleciaCassidy

Answers:

a) $\rho_{cylinder}= 0.55 g/cm^{3}$

b) $\rho_{liq}= 1.48 g/cm^{3}$

c) When we divided both volumes (sumerged and displaced) the factor $\pi r^{2}$ is removed during calculations.

Explanation:

a) According to Archimedes’ Principle:

A body totally or partially immersed in a fluid at rest, experiences a vertical upward thrust equal to the mass weight of the body volume that is displaced.

In this case we have a wooden cylinder floating (partially immersed) in water. This object does not completely fall to the bottom because the net force acting on it is zero, this means it is in equilibrium. This is due to Newton’s first law of motion, that estates if a body is in equilibrium the sum of all the forces acting on it is equal to zero.

Hence:

W_(cylinder)=B (1)

Where:

W_(cylinder)=m.g is the weight of the wooden cylinder, where is its mass and gravity.

is the Buoyant force, which is the force the fluid (water in this situation) exert in the submerged cylinder, and is directed upwards.

We can rewrite (1) as follows:

$m_{cylinder}g=m_{water}g$ (2)

On the other hand, we know density $\rho$ establishes a relationship between the mass of a body andthe volume it occupies. Mathematically is expressed as:

$\rho=\frac{m}{V}$ (3)

isolating the mass:

$m=\rho V$ (4)

Now we can express (2) in terms of the density and the volume of cylinder and water:

$\rho_{cylinder} V_{cylinder} g=\rho_{water} V_{water} g$ (5)

In this case $V_{water}$ is the volume of water displaced by the wooden cylinder (remembering Archimedes's Principle).

At this point we have to establish the total volume of the cylinder and the volume of water displaced by the sumerged part:

$V_{cylinder}=\pi r^{2} h$ (6)

Where is the radius and h=30 cm the total height of the cylinder.

$V_{water}=\pi r^{2} (h-h_{top})$ (7)

Where $h_{top}=13.5 cm$ is the height of the top of the cylinder above the surface of water and $(h-h_{top})$ is the height of the sumerged part of the cylinder.

Substituting (6) and (7) in (5):

$\rho_{cylinder} \pi r^{2} h g=\rho_{water} \pi r^{2} (h-h_{top}) g$ (8)

Clearing $\rho_{cylinder}$ :

$\rho_{cylinder}=\frac{\rho_{water}(h-h_{top})}{h}$ (9)

Simplifying;

$\rho_{cylinder}=\rho_{water}(1-\frac{h_{top}}{h}$ (10)

Knowing $\rho_{water}=1g/cm^{3}$ :

$\rho_{cylinder}=1g/cm^{3}(1-\frac{13.5 cm}{30cm})$ (11)

$\rho_{cylinder}= 0.55 g/cm^{3}$ (12) This is the density of the wooden cylinder

b) Now we have a different situation, we have the same wooden cylinder, which density was already calculated ( $\rho_{cylinder}= 0.55 g/cm^{3}$ ), but the density of the liquid $\rho_{liq}$ is unknown.

Applying again the Archimedes principle:

$\rho_{cylinder} V_{cylinder} g = \rho_{liq} V_{liq} g$ (13)

Isolating $\rho_{liq}$ :

$\rho_{liq}= \frac{\rho_{cylinder} V_{cylinder}}{V_{liq}}$ (14)

Where:

$V_{cylinder}=\pi r^{2} h$

$V_{liq}=\pi r^{2} (h-h_{top})$

Then:

$\rho_{liq}= \frac{\rho_{cylinder} \pi r^{2} h}{\pi r^{2} (h-h_{top})}$ (15)

$\rho_{liq}= \frac{\rho_{cylinder} h}{h-h_{top}}$ (16)

$\rho_{liq}= \frac{0.55 g/cm^{3} (30 cm)} {30 cm - 18.9 cm}$ (17)

$\rho_{liq}= 1.48 g/cm^{3}$ (18) This is the density of the liquid

c) As we can see, it was not necessary to know the radius of the cylinder (we did not need to knoe its length and width), we only needed to know the part that was sumerged and the part that was above the surface of the liquid.

This is because in this case, when we divided both volumes (sumerged and displaced) the factor $\pi r^{2}$ is removed during calculations.

answered: Guest

which piece of furniture will have the most inertia and give the furniture movers the most difficulty in moving?

answer

a 75kg dining table

answered: Guest

Awoodchuck would chuck all the wood he could chuck if a woodchuck could chuck wood.