Write a hypothesis about the effect of the angle of the track on the acceleration of the cart. use the "if . . then . . because . ." format and be sure to answer the lesson question: "how does an object's position and velocity change as the object accelerates? "

The metric unit of electrical power is the watt volt ampere ohm

1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?

Aperson stands on a platform, initially at rest, that can rotate freely without friction. the moment of inertia of the person plus the platform is ip. the person holds a spinning bicycle wheel with its axis horizontal. the wheel has moment of inertia iw and angular velocity ωw. take the ωw direction counterclockwise when viewed from above. part a what will be the angular velocity ωp of the platform if the person moves the axis of the wheel so that it points vertically upward?