Physics, 07.09.2019 05:21, amunnik04

Doing a physics lab and need to propagate uncertainty for experimental results. i need the uncertainty in order to add it to my scatter plot for the error bars, therefore, i need both a positive and a negative error value. how is this done for my data? show all work
373.67 +/- 15.444
210 +/- 12.82
239.33 +/- 19.98
443.67 +/- 17.99

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 05:30, kolibeilfuss

What is the most useful equation for electric power?

Answers: 3

continue

Physics, 22.06.2019 18:50, mariposa91

Avertical clean glass piezometer tube has an inside diameter of d = 1 mm and is used to measure pressure in a horizontal pipe carrying water as shown. due to pressure in the pipe, the water at 20c rises into the tube to a height h. if the water pressure in the pipe is p = 500 pa gauge, estimate the height h: (a) without considering surface tension (b) with surface tension (capillary) effects. the contact angle  can be assumed at 30 deg

Answers: 2

continue

Physics, 22.06.2019 20:00, chantelljenkins2

Aturntable that spins at a constant 74.0 rpm takes 3.10 s to reach this angular speed after it is turned on. find its angular acceleration (in rad/s2), assuming it to be constant, and the number of degrees it turns through while speeding up.

Answers: 2

continue

Physics, 22.06.2019 20:10, hncriciacheichi

Two cannon balls weighing 18 kg and 24 kg are chained together and fired horizontally with a velocity of 165 m/s from the top of a 21-m wall. the chain breaks during the flight of the cannonballs and the 18-kg cannonball strikes the ground at t = 1.5 s, at a distance of 240 m from the foot of the wall, and 7 m to the right of the line of fire. determine the position of the other cannonball at that instant. neglect the resistance of the air.

Answers: 1

continue

Do you know the correct answer?

Doing a physics lab and need to propagate uncertainty for experimental results. i need the uncertain...