A0.35-kg turntable of radius 0.30 m spins about a vertical axis through its center. a constant rotational acceleration causes the turntable to accelerate from 0 to 24 revolutions per second in 8.0 s. part a
calculate the rotational acceleration.
\alpha = ?
part b
calculate the torque required to cause this acceleration.
torque = ?

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Which object is most likely represented by a dot?

Aperson gives a shopping cart an initial push along a horizontal floor to get it moving, and then lets go. the cart travels forward along the floor, gradually slowing as it moves. consider the horizontal force(s) on the cart while it is moving forward and slowing. which of the following statements is correct? (a) both a forward and a backward force are acting on the cart, but the forward force is larger. (b) only a forward force is acting which diminishes with time. (c) both a forward and a backward force are acting on the cart, but the backward force is larger. (d) only a backward force is acting, no forward force.