The work function (energy needed to remove an electron) of gold is 5.1 ev. two pieces of gold (at the same potential) are separated by a distance l. for what value of l will the transmission probability for an electron to cross from one to the other be t ≈ 10-3? assume that g = 1 in the formula for the tunneling probability.

The value of L is 0.3 nm.

Explanation:

Given that,

Energy

Transmission probability = 10⁻³

We need to calculate the value of L

We know that,

Formula of tunneling probability

....(I)

Where,

....(II)

Where, m = mass of electron

Put the value in equation (II)

From equation (I)

Hence, The value of L is 0.3 nm.

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water

which piece of furniture will have the most inertia and give the furniture movers the most difficulty in moving?  

answer

a 75kg dining table