Suppose you place a10kg block on a 300 inclined plane. the block is allowed to slide to the ground, a horizontal distance ofdmeters and a vertical distance ofhmeters. if coefficient of kinetic friction is 0.45, calculate the magnitude of the kinetic and static friction. the plane is a right triangle. the 30 degrees is on the bottom and the 10 kg block is on the top of the hypotenouse.

Aman does 500 j of work pushing a car a distance of 2 m. how much force does he apply? assume there is no friction. a. 250 n b. 1000 n c. 125 n d. 500 n

Which units can be used to measure length or distance? check all that apply. gram meter kilometer liter inch

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i. e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?