Physics, 26.07.2019 22:20, darajeanty2004p7cu4m

Calculate the density of fcc al with a lattice parameter of 0.4045 nm

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 17:10, lesok0818

Which statement best describes the superposition principle? a.) if two in-phase waves arrive simultaneously at a point, their amplitudes add up b.) if two out-of-phase waves arrive simultaneously at a point, their amplitudes add up c.) if two in-phase waves arrive at a point one after another, their amplitudes add up d.) if two out-of-phase waves arrive at a point one after another, their amplitudes adds up

Answers: 2

continue

Physics, 22.06.2019 18:50, rurbanok12

8.29 two streams containing pyridine and acetic acid at 25°c are mixed and fed into a heat exchanger. due to the heat-of-mixing effect, it is desired to reduce the temperature after mixing to 25°c using a stream of chilled ethylene glycol as indicated in the diagram. calculate the mass flow rate of ethylene glycol needed. the heat capacity of ethylene glycol at these conditions is approximately 2.8 kj/(kg k), and the enthalpy change of mixing (δmixh) is given below.

Answers: 3

continue

Physics, 22.06.2019 19:30, cocoabean1981

The ability to make things happen is also called a. heat b. force c. matter d. energy

Answers: 2

continue

Physics, 22.06.2019 20:50, dorkygirl

An ideal otto cycle has a compression ratio of 8. at the beginning of the compression process, air is at 95 kpa and 27°c, and 750 kj/kg of heat is transferred to air during the constant-volume heat-addition process. assuming constant specific heats at room temperature, determine (a) the pressure and temperature at the end of the heat-addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. (4390 kpa, 1730 k; 423 kj/kg; 56.4%; 534 kpa)

Answers: 1

continue

Do you know the correct answer?

Calculate the density of fcc al with a lattice parameter of 0.4045 nm...