Physics
Physics, 24.07.2019 21:20, goosetuave

Apressure cylinder has a diameter of 150-mm and has a 6-mm wall thickness. what pressure can this vessel carry if the maximum shear stress is not to exceed 25 mpa?

answer
Answers: 3

Other questions on the subject: Physics

image
Physics, 22.06.2019 02:00, honeybaby675610
Askydiver weighing 140 lb (including equipment) falls vertically downward from an altitude of 19,000 ft and opens the parachute after 18 s of free fall. assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0.55|v| when the parachute is closed and is of magnitude 14|v| when the parachute is open, where the velocity v is measured in ft/s. assume that acceleration due to gravity has magnitude 32 ft/s/s; remember that weight is the product of mass and gravitational acceleration. (a) find the speed of the skydiver when the parachute opens. (b) find the distance fallen before the parachute opens. (c) what is the limiting velocity vl after the parachute opens? (d) determine how long the sky diver is in the air after the parachute opens. (e) plot the graph of velocity versus time from the beginning of the fall until the skydiver reaches the ground.
Answers: 1
image
Physics, 22.06.2019 04:00, jaejaeJae9534
Acompound machine is also called a machine. a. force b. simple c. complex d. directional
Answers: 1
image
Physics, 22.06.2019 13:40, crayons18
An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.
Answers: 2
image
Physics, 22.06.2019 14:10, nikki4367
Amachinist turns the power on to a grinding wheel, at rest, at time t = 0 s. the wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 96 rad/s. the wheel is run at that angular velocity for 40 s and then power is shut off. the wheel slows down uniformly at 1.5 rad/s2 until the wheel stops. in this situation, the time interval of deceleration is closest to:
Answers: 3
Do you know the correct answer?
Apressure cylinder has a diameter of 150-mm and has a 6-mm wall thickness. what pressure can this ve...

Questions in other subjects: