Physics
Physics, 19.07.2019 12:10, shawnr6989

Aseparately excited d. generator has armature
resistance of 0.1ohms and brush drop 2v. when
running at 1000 rimp, it delivers a current of
100a at 250v to a load of constant resistance
if the generater speed drop to 700 r. m. p. find
the current delivered to the load.

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:00, markyyy53
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
image
Physics, 22.06.2019 19:50, carlinryan
An electron moves with a constant horizontal velocity of 3.0 × 106 m/s and no initial vertical velocity as it enters a deflector inside a tv tube. the electron strikes the screen after traveling 26 cm horizontally and 19 cm vertically upward with no horizontal acceleration. what is the constant vertical acceleration provided by the deflector? (the effects of gravity can be ignored.)
Answers: 2
image
Physics, 23.06.2019 06:30, JANA279
If a car is traveling on the highway at a constant velocity, the force that pushes the car forward must be a. equal to the weight of the car. b. less than the force of friction exerted upon the car. c. equal to the force of friction exerted upon the car. d. greater than the weight of the car.
Answers: 1
image
Physics, 23.06.2019 07:40, abelsoto
Consider lifting a box of mass m to a height h using two different methods: lifting the box directly or lifting the box using a pulley (as in the previous part). what is wd/wp, the ratio of the work done lifting the box directly to the work done lifting the box with a pulley?
Answers: 2
Do you know the correct answer?
Aseparately excited d. generator has armature
resistance of 0.1ohms and brush drop 2v. when

Questions in other subjects:

Konu
Social Studies, 18.03.2021 01:00
Konu
Mathematics, 18.03.2021 01:00