Physics, 18.07.2019 04:20, sebastiantroysmith

Explain using an input and output voltage sketches how a vco (ic 566) can be used to generate an fm (frequency modulation) signal and how a pll (phase locked loop) can be used to demodulate the fm signal. why is fm signal better than am (amplitude modulation) signal?

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 10:00, yasminlockser6

Awater-filled u-tube manometer is used to measure the pressure inside a tank that contains air. the water level in the u-tube on the side that connects to the tank is 5 ft above the base of the tank. the water level in the other side of the u-tube (which is open to the atmosphere) is 2 ft above the base. determine the pressure within the tank.

Answers: 2

continue

Physics, 22.06.2019 19:30, NewKidnewlessons

Aplayground slide is 8.80 ft long and makes an angle of 25.0° with the horizontal. a 63.0-kg child, initially at the top, slides all the way down to the bottom of the slide. (a) choosing the bottom of the slide as the reference configuration, what is the system's potential energy when the child is at the top and at the bottom of the slide? what is the change in potential energy as the child slides from the top to the bottom of the slide? (include the sign of the value in your answer.)

Answers: 3

continue

Physics, 22.06.2019 21:30, katwright1124

Atoaster oven has a resistive heating element. the average rate at which it dissipates energy as thermal energy is 1.00 \(\rm kw\). in the united states, emf amplitude in household circuits is \(\mathcal e_{\max}\) = 170 \({\rm \; v}\) and the \(\rm ac\) oscillation rate is 60 \(\rm hz\). part a what is the root-mean-square current through the heating element?

Answers: 2

continue

Physics, 22.06.2019 23:40, Demondevilg

Along wire of diameter 1 mm is submerged in an oil bath of temperature ∞ 31°c. the wire has an electrical resistance per unit length of 0.01 ω/m. if a current of 103 a flows through the wire and the convection coefficient is 500 w/m2·k, what is the steady-state temperature of the wire? from the time the current is applied, how long does it take for the wire to reach a temperature that is within 1°c of the steady-state value? the properties of the wire are 8000 kg/m3, 500 j/kg·k, and 20 w/m·k.

Answers: 3

continue

Do you know the correct answer?

Explain using an input and output voltage sketches how a vco (ic 566) can be used to generate an fm...