Physics, 16.07.2019 05:20, avaleasim

An assembly line with 17 tasks is to be balanced. the longest task is 2.4 minutes, and the total time for all tasks is 18 minutes. the line will operate for 450 minutes per day. a. what are the minimum and maximum cycle times? b. what range of output is theoretically possible for the line? c. what is the minimum number of work stations needed if the maximum output rate is to be sought? d. what cycle time will provide an output rate of 125 units per day? e. what output potential will result if the cycle time is (1) 9 minutes? (2) 15 minutes?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 18:30, angiebailey1605

A10.0 kg cart and a 15kg cart are locked together with a compressed spring between them. they are then released so that the spring pushes the two carts apart. the 10.0 kg cart is moving at 4.5 m/s afterward. how fast is the 15kg cart moving? 3.0 m/s 2.0 m/s 4.5 m/s 5.0 m/s

Answers: 1

continue

Physics, 21.06.2019 19:30, Jazminfun70

Density of salty water as compared to the density of pure water is(a) is less(b) is always equal(c) is always more(d) may be less or more

Answers: 1

continue

Physics, 22.06.2019 10:30, Kathryn014

Light from a sodium lamp passes through a diffraction grating that has 1000 slits per millimeter. the interference pattern is viewed on a screen 1.000 m behind the grating. the first (m = 1) two bright yellow fringes that are visible are 0.7288 m and 0.7300 m from the central maximum. what are the wavelengths of these two fringes?

Answers: 2

continue

Physics, 22.06.2019 10:50, afonseca73

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Answers: 3

continue

Do you know the correct answer?

An assembly line with 17 tasks is to be balanced. the longest task is 2.4 minutes, and the total tim...