Physics, 16.07.2019 01:40, kenzierosa

Two highways connect an origin-destination pair, having performance functions of t1 = 5 + 4(x1/c1) and t2 = 4 + 5(x2/c2) for routes 1 and 2, respectively. for the performance functions, the t's are in minutes and the flows (x's) and capacities (c's) are in thousands of vehicles per hour. the total traffic demand for the two highways is 4000 vehicles during the peak hour. initially, the capacities of routes 1 and 2 are 3500 veh/h and 4600 veh/h, respectively. a construction project is planned that will cut the capacity of route 2 by 2100 veh/g. how much additional vehicle-hours of travel time will be added to the system assuming user-equalibrium conditions hold?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 23:20, ElizabethF

Asmall, positively charged ball is moved close to a large, positively charged ball. which describes how the small ball likely responds when it is released? it will move toward the large ball because like charges repel. it will move toward the large ball because like charges attract. it will move away from the large ball because like charges repel. it will move away from the large ball because like charges attract.

Answers: 3

continue

Physics, 22.06.2019 03:00, BeautyxQueen

Which of the following is not a part of the respiratory system? a. pharynx b. trachea c. pancreas d. larynx hurrim timed

Answers: 1

continue

Physics, 22.06.2019 03:30, dmarte11092001

What makes thermal imaging cameras useful? they can detect differences in color. they can detect differences in wave speeds. they can detect differences in temperature. they can detect mechanical waves.

Answers: 1

continue

Physics, 22.06.2019 10:50, afonseca73

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Answers: 3

continue

Do you know the correct answer?

Two highways connect an origin-destination pair, having performance functions of t1 = 5 + 4(x1/c1) a...