An engineer has designed a valve that will regulate water pressure on an automobile engine. the valve was tested on 170 engines and the mean pressure was 4.9 lbs/square inch. assume the variance is known to be 1. if the valve was designed to produce a mean pressure of 5 lbs/square inch, is there sufficient evidence at the 0.02 level that the valve does not perform to the specifications? state the null and alternative hypotheses for the above scenario.

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

answer: 2×10^-2kg

explanation: density= mass per volume

vol=mass/density

converting to s.i units we have;

3÷1000kg = 0.003

1.5÷100m = 0.15

0.003/0.15 = 0.02kg