W/(mk)], sits on a ceramic heating element at 104.0 °c. the diameter of the pan is 18.0 cm, and it contains boiling water at 100.0 °c. (a) if the copper-clad bottom is touching the heat source, what is the temperature at the copper-steel interface? (b) at what rate will the water evaporate from the pan? (latent heat of water evaporation ly-2256 j/g)

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water

the speed of the cart after 3 seconds of low fan speed is ⇒ 54.0 cm/s.

the speed of the cart after 5 seconds of medium fan speed is ⇒ 120.0 cm/s.

the speed of the cart after 2 seconds of high fan speed is ⇒ 64.0 cm/s. 

just did the lab.

it would stay the same