Amotor with an operating resistance of 2.21 ohms is connected to a voltage source. the current in the circuit is 3.8 a and the power of the system is 32 watts. what is the voltage of the source?

Using software, a simulation of a javelin being thrown both on earth and on the moon is created. in both cases, the velocity and angle of projection are kept the same. on earth, the javelin covers a distance y. what distance would it cover on the moon? (the moon’s gravity is about 1/6th that of earth.) a. 6y b. 6/y c. y/6 d. (y+6)2

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Give an example in which the electrical energy changes to light energy