Physics, 23.12.2019 20:31, avagymnast421

A60.0 kg runner is moving at 6.00 m/s and speeds up to 9.00 m/s. the runner’s change in kinetic energy is 1,350 j.

how much work was done?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 14:50, arslonm777

Along, straight wire with 3.0 a current flowing through it produces magnetic field strength 1.0 t at its surface. if the wire has a radius r, where within the wire is the field strength equal to 36.0% of the field strength at the surface of the wire? assume that the current density is uniform throughout the wire

Answers: 2

continue

Physics, 22.06.2019 12:30, cxmochaa

If you place a magnet under a clear dish, and sprinkle iron fillings over it, above what part of the magnet will most of the fillings gather

Answers: 2

continue

Physics, 22.06.2019 12:50, shollydot1379

Assume you measured the mass of the cart to be (500 ± 1) g and the mass of the additional mass you put on the cart to be (500 ± 1) g as well. since the scale you are using in the lab cannot measure objects heavier than 600g you will have to sum up individual pieces and propagate the error. so what would be the mass and the standard error of the cart and the mass

Answers: 3

continue

Physics, 22.06.2019 14:20, timothyashburn8

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.

Answers: 1

continue

Do you know the correct answer?

A60.0 kg runner is moving at 6.00 m/s and speeds up to 9.00 m/s. the runner’s change in kinetic ener...