Physics, 08.01.2020 07:31, sierravick123owr441

Why is the chemical formula magnesium sulfide written as mgs and not mg2s2?

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 14:00, beyza13

Rank the torques on the five doors shown in the figure above from least to greatest. note that the magnitude of all the forces is the same

Answers: 3

continue

Physics, 22.06.2019 03:30, cookies1164

What is the momentum of a 2 kg object moving at 15 meters per second

Answers: 1

continue

Physics, 22.06.2019 07:30, babygreg2001p97abr

Boxing gloves are padded to lessen the force of a blow. (a) calculate the force exerted by a boxing glove on an opponent’s face, if the glove and face compress 7.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. (b) calculate the force exerted by an identical blow in the gory old days when no gloves were used and the knuckles and face would compress only 2.00 cm. (c) discuss the magnitude of the force with glove on. does it seem high enough to cause damage even though it is lower than the force with no glove?

Answers: 1

continue

Physics, 22.06.2019 10:50, afonseca73

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.