Which statements accurately describe electronic tools? check all that apply.

electronic tools collect large amounts of data.
electronic tools take a long time to record data.
electronic tools collect data with little precision.
electronic tools display data quickly and clearly.
electronic tools provide accurate data analysis.
electronic tools require lots of space for data storage.
hurry worth 98pts

Electronic tools provide accurate data

Explanation:

The sentence "Electronic tools provide accurate data analysis" is the only correct of all the options shown, because it is the only sentence that describes a characteristic present in all the electronic tools. The other options are not all electronic tools, but each option represents a type of electronic tool, depending on the time and technology used to build the tool.

Electronic tools collect large amounts of data.

Electronic tools display data quickly and clearly.

Electronic tools provide accurate data analysis.

Explanation:

In the 21st century, electronic tools are useful in every area of life. From education to banking to statistical data analysis to sophisticated technological designs etc.

These electronic tools could collect, process, analyse and display large data with great precision within a very short time.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

the box does not move because you need to use a force greater than 300 n. you are only using 50 n. it needs to at least be 301 n for the box to move because then it is an unbalanced force and it will move the way that the greater force is pushing it. if you use only 300 n it will be a balanced force and will not move because the force you are exerting on the   box is the same as its force.

hope this !

im sorry if i went too in depth, i am going to include a link to a video on khan academy that will explain this.   hope that you like the video and that it explains more in detail to you.

that is the link.