Physics
Physics, 27.06.2019 04:30, 2024056

Aperson standing at the edge of a merry-go-round must hold on tightly to keep from flying off the edge as it speeds up. what name is given to the force that keeps the person moving in a circular path?

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 01:30, hardwick744
The speed of light in a material is 0.50 c. what is the critical angle of a light ray at the interface between the material and a vacuum?
Answers: 1
image
Physics, 22.06.2019 06:20, jonmorton159
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
image
Physics, 22.06.2019 06:30, haha81
Which of these statements is true? a. quarks pair with leptons to form protons and neutrons. b. quarks pair with bosons to form photons. c. quarks pair with photons to form protons and neutrons. d. quarks pair with other quarks to form protons and neutrons. e. quarks pair with electrons to form protons.
Answers: 1
image
Physics, 22.06.2019 12:50, shollydot1379
Assume you measured the mass of the cart to be (500 ± 1) g and the mass of the additional mass you put on the cart to be (500 ± 1) g as well. since the scale you are using in the lab cannot measure objects heavier than 600g you will have to sum up individual pieces and propagate the error. so what would be the mass and the standard error of the cart and the mass
Answers: 3
Do you know the correct answer?
Aperson standing at the edge of a merry-go-round must hold on tightly to keep from flying off the ed...

Questions in other subjects: