Physics, 22.08.2019 04:00, elizabethwaller8104

Which scientific term is defined as the rate at which work is accomplished?
a. potential
b. mechanics
c. power
d. energy

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 01:10, joejoefofana

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

Answers: 3

continue

Physics, 22.06.2019 05:40, thomasalmo2014

Unpolarized light of intensity i_0=750w/m^2 is incident upon two polarizers. after passing through both polarizers the intensity is i_2=280w/m^2. (a) what is the intensity of the light after it passes through the first polarizer in w/m^2? (b) write an equation for the angle between the polarizers in terms of the initial (i_0) and final (i_2) intensities. (c) find the angle between the polarizers in degrees.

Answers: 3

continue

Physics, 22.06.2019 16:20, adiafloresp2dkbx

Specific heat refers to the amount of heat required to change 1 gram of a substance by degree(s) celsius

Answers: 1

continue

Physics, 22.06.2019 17:00, miya214

The chart shows the costs and shipping times for materials that a company needs to build a new product. which describes the best trade-off if the company needs to start building their product within the next two years? they should order the domestic materials because it is always best to choose the fastest shipping time. they should order the imported materials because it is always best to choose the lowest cost for materials. since the shipping time is longer, they should order the domestic materials because the additional cost is worth it to get the materials in time. even though the shipping time is longer, they should order the imported materials because they are less expensive and should arrive in plenty of time to build the product.

Answers: 1

continue

Do you know the correct answer?

Which scientific term is defined as the rate at which work is accomplished?
a. potential