Physics, 20.07.2019 05:00, whitakers87

Air at 20ºc with a convection heat transfer coefficient of 25 w/m2·k blows over a horizontal steel hot plate (k = 43 w/m·k). the surface area of the plate is 0.38 m2 with a thickness of 2 cm. the plate surface is maintained at a constant temperature of ts = 350°c, and the plate loses 300 w from its surface by radiation. calculate the inside plate temperature (ti). (round your answer up to 3 decimal places.)

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 00:40, naomicervero

The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.

Answers: 1

continue

Physics, 22.06.2019 04:30, tinytoonjr8052

Light from the sun reaches the earth in 8.3 minutes. the velocity is 3.00 x 10^8 m/s. how far is earth from the sun? i know how to get to d = (3 x 10^8 m/s)(498 sec). i just don't know how to get from there to the answer being 1.5 x 10^11 m.

Answers: 3

continue

Physics, 22.06.2019 14:30, samehajamal1234567

When the displacement of a mass on a spring is 12a the half of the amplitude, what fraction of the mechanical energy is kinetic energy? at what displacement, as a fraction of a, is the mechanical energy half kinetic and half potential?

Answers: 3

continue

Physics, 22.06.2019 16:30, yagalneedshelp8338

Acalorimeter uses the principle that thermal energy flows from hotter material to colder material until both reach the same

Answers: 1

continue

Do you know the correct answer?

Air at 20ºc with a convection heat transfer coefficient of 25 w/m2·k blows over a horizontal steel h...