A machine shop uses two lathes to make shafts for electric motors. A sample of five shafts from each lathe are checked for quality-control purposes. The diameter of each shaft (in inches) is given as follows: Lathe I Lathe II 0.501 0.503 0.498 0.504 0.502 0.495 0.497 0.497 0.502 0.501 The mean diameter in each sample is 0.500. Find the standard deviation for the sample of shafts checked from Lathe 01 and Lathe 02. Which lathe is more consistent and why

the slope of the line is 60

one point on the line is (40,10)

step-by-step explanation:

in the equation outside the parenthesis the equation always tells you the slope. in this case it is 60.

in the parenthesis is also says 40 which is x because it is near the x and 10 is y because it is near y.

i belive those are the ones that are under 90 degreese.

1/3

step-by-step explanation:

to find this, you can divide 12 by 4 which is 3 or you can multiply 4 until you reach 12 (4x3=12). both should give you 3, meaning theres three times less bananas than there are oranges.

{x = -1/2 ,   y = -1

step-by-step explanation:

solve the following system:

{2 x + y = -2

{10 x - 3 y = -2

in the first equation, look to solve for y:

{2 x + y = -2

{10 x - 3 y = -2

subtract 2 x from both sides:

{y = -2 x - 2

{10 x - 3 y = -2

substitute y = -2 x - 2 into the second equation:

{y = -2 x - 2

{10 x - 3 (-2 x - 2) = -2

10 x - 3 (-2 x - 2) = (6 x + 6) + 10 x = 16 x + 6:

{y = -2 x - 2

{16 x + 6 = -2

in the second equation, look to solve for x:

{y = -2 x - 2

{16 x + 6 = -2

subtract 6 from both sides:

{y = -2 x - 2

{16 x = -8

divide both sides by 16:

{y = -2 x - 2

{x = -1/2

substitute x = -1/2 into the first equation:

{y = -1

{x = -1/2

collect results in alphabetical order:

answer:   {x = -1/2 ,   y = -1