What is the RStudio code used to create the following two-way table? phys_challenge
gender No difficulty Has difficulty
Male
45.05877
40.61303
Female 54.94123
59.38697
O tally(-gender phys_challenge, data =atu_clean, format = 'percent')
O tally (~bully gender, data = atu_clean, format = "percent")
O tally (-bully_schoolſgender data = atu_clean)
O tally (-gender challenge data = atu_clean)

You are assembling pieces of an iron gate to complete a fence. the finished gate will look like the one below. in order to assemble the gate it is important to under how the pieces are related. part 1: how are pies 1 and 2 in the archway related? part 2: how are the rectangular sections 5 and 6 in the center of the gate related to each other?

Dylan and dusty plan to take weekly surfing lessons together. if the 2-hour lessons are $20 per person and they plan to spend $100 each on new surfboards, what is the maximum number of lessons the two can take if the total amount spent for lessons and surfboards is at most $480?

Airplane speeds are measured in three different ways: (1) indicated speed, (2) true speed, and (3) ground speed. the indicated airspeed is the airspeed given by an instrument called an airspeed indicator. a plane’s indicated airspeed is different from its true airspeed because the indicator is affected by temperature changes and different altitudes of air pressure. the true airspeed is the speed of the airplane relative to the wind. ground speed is the speed of the airplane relative to the ground. for example, a plane flying at a true airspeed of 150 knots into a headwind of 25 knots will have a ground speed of 125 knots. the problems below refer to static and dynamic pressure. static pressure is used when a body is in motion or at rest at a constant speed and direction. dynamic pressure is used when a body in motion changes speed or direction or both. a gauge compares these pressures, giving pilots an indicated airspeed. in problem #s 1 and 2, use the following information. the indicated airspeed s (in knots) of an airplane is given by an airspeed indicator that measures the difference p (in inches of mercury) between the static and dynamic pressures. the relationship between s and p can be modeled by s=136.4p√+4.5. 1. find the differential pressure when the indicated airspeed is 157 knots. 2. find the change in the differential pressure of an airplane that was traveling at 218 knots and slowed down to195 knots. in problem #s 3 and 4, use the following information. the true airspeed t (in knots) of an airplane can be modeled by t=(1+a50,000) ⋅ s, where a is the altitude (in feet) and s is the indicated airspeed (in knots). 3. write the equation for true airspeed t in terms of altitude and differential pressure p. 4. a plane is flying with a true airspeed of 280 knots at an altitude of 20,000 feet. estimate the differential pressure. explain why you think your estimate is correct.