Suppose you are working with a data set that is normally distributed, with a mean of 200 and a standard deviation of 47. Determine the value of x from the following information. 60% of the values are greater than x. x is below 17% of the values. 22% of the values are less than x. x is greater than 55% of the values.

That is, 60% of the values are greater than 188.25

244.18 is below 17% of the values

22% of the values are less than 163.81

205.64 is greater than 55% of the values

step-by-step explanation:

Use the standard normal distribution table attached.

- 60% of the values are greater than x is equivalent to find Z = 40% = 0.4 (that is, the right tail has 60% of the area in it). In this case:

Z = -0.25

Z is computed as follows:

Z = (x - mean)/standard deviation

Replacing:

-0.25 = (x - 200)/47

x = -0.25*47 + 200 = 188.25

-  x is below 17% of the values. That is equivalent to: right-tail has 17% of the area. To get this, find Z which are is 0.17 and multiply it by -1, then, solve to find x:

Z = -0.94

0.94 = (x - 200)/47

x = 0.94*47 + 200 = 244.18

- 22% of the values are less than x. That is equivalent to: left tail of 22%. From the figure we see that correspond to Z = -0.77. Therefore:

-0.77 = (x - 200)/47

x = -0.77*47 + 200 = 163.81

- x is greater than 55% of the values. That is equivalent to: left tail of 55%. To get this, find Z with 45% in the table, which is -0.12, multiply it by -1, which makes Z = 0.12. Then:

0.12 = (x - 200)/47

x = 0.12*47 + 200 = 205.64

answer: yard ramps with a level off platform are typically 36 feet long. truck, rather than at an angle, enabling access to those pallets at the very back of the truck. if you are using your yard ramp to convert a loading dock into a drive-in door, we even at 60 inches (5 feet) high and a 30 foot ramp, the slope of the ramp will be less

step-by-step explanation: