Five workstations (1, 2, 3, 4, and 5) that produce about ten similar parts must be arranged into an in-line layout. The daily flow of parts between workstations is as follows: 40 parts from stations 5 to 2, 35 parts from stations 5 to 3, 20 parts from stations 3 to 1, 25 parts from stations 1 to 4, 60 parts from 3 to 2, 15 parts from stations 2 to 5, and 30 parts from stations 4 to 2.

A) Use the Hollier algorithm described to determine the most logical sequence of stations in the work system.
B) Draw the network diagram for the system.
C) Compute the percentage of in-sequence moves, by-passing moves, and backflow moves for the sequence.

`1234567890-=/*-qwertyuiop[]asdfghjkl; '\\zxcvbnm,./+ /

1 x=22.52

2: 65/39=604+39x

65x-39x=604

26x=604

x=604/26

×=23.23

the area of a triangle is determined by the formula: base x height * 1/2

you'll need to assign a base to the triangle. based on the vertices given, the simplest base would be the line segment from (-2,1) to (2,1). the distance between any two numbers is found by just subtracting them. here, you should subtract the x values to find the distance of this side.

2 - (-2) = 4.

so the distance (aka the length of the base) is 4. the height of the triangle is the distance between the base and the highest point on the triangle which is (3,4). we should subtract the y values this time to find the height/distance.

4 - 1 = 3

so the height is 3.

base = 4

height = 3

hope this if needed hmu