Aprocess produces a certain part with a mean diameter of 2 inches and a standard deviation of 0.05 inches. the lower and upper engineering specification limits are 1.6 inches and 3.5 inches. what is the cp (measure of potential capability)?

The value of Cp (measure of potential capability) is 6.33.

Step-by-step explanation:

Given information: Process average = 2 inches, process standard deviation = 0.05 inches, lower engineering specification limit = 1.6 inches and upper engineering specification limit =3.5 inches.

The formula for Cp (measure of potential capability) is

Where, USL is upper specification limit, LSL is specification limit, σ is process standard deviation.

Substitute USL=3.5, LSL=1.6 and σ=0.05 in the above formula.

Therefore the value of Cp (measure of potential capability) is 6.33.

solution:

the given function is ,

      =

the three roots of this quadratic function is , 0 ,8 and 10.all the roots are real and rational.

if a quadratic equation is of the form ,

sum of the roots = a + b +c= 0+8+10=18=  

product of roots taken two at a time = a b + b c+ c a = 0+80+0=80 =  

product of roots = a b c = 0=  

there are 11 doors in a hall starting from 0 to 11.the entry in the hall is permitted through gate number 0 and exit is allowed through only gate number 8 and 10.so, three roots(0,8,10) of quadratic function is given by entry and exit route of this hall.