The walker family is building a cabin for vacationing. mr. walker and his son terrell have erected a scaffold to stand on while they build the walls of the cabin. as they stand on the scaffold terrell pulls on a rope attached to a support beam with a force of 400 newtons (n) at an angle of 65 with the horizontal. mr. walker pulls with a force of 600 newtons at an angle of 110 with the horizontal. what is the magnitude of the combined force they exert on the log?

Alright, lets get started.

Please refer the attached diagram.

400N is applied with angle 65 degrees.

So, there will be two components of the force.

X component will be = fx1 = 400 cos 65

X component will be  fx1 = N

Y component will be fy1 = 400 sin 65

Y component will be fy1 =

Similarly, 600 N force is applied on angle 110degrees, so the components will be

X component fx2 = -600 cos 80

X component fx2 = -

Y component fy2 = 600 sin 80

Y component fy2 =

So, combined X component will be =  

Combined Y component will be =

So, magnitude will be  =

So the magnitud of combined force will be 955.58 N.  :   Answer

Hope it will help :)

there are no short passages to look at

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).