Engineering
Engineering, 01.04.2022 14:30, xojade

Consider a 10 x 10^6 m3 lake fed by a polluted stream having a flow rate of 5.0 m3
/s and pollutant
concentration equal to 10 mg/l. There is also a sewage outfall that discharges 0.5 m3
/s of
wastewater having a pollutant concentration of 100 mg/L. The stream of sewage wastes have a
decay rate coefficient of 0.20 / day.
a) Assuming the pollutant is completely mixed in the lake and assuming to evaporation or
other water losses or gains, find the steady-state pollutant concentration in the lake.
b) The sewage discharge was eliminated as a source of pollution. The incoming stream still has
flow Qs= 5 m3
/s and concentration Cs= 10 mg/L. To solve the problem, find the new final
steady-state concentration. Assuming complete mix conditions, find the concentration of
pollutant in the lake on week after the diversion.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
image
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
image
Engineering, 04.07.2019 18:20, cristykianpour
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
image
Engineering, 04.07.2019 19:10, alex6toes
What are the major differences between injection molding and extrusion?
Answers: 2
Do you know the correct answer?
Consider a 10 x 10^6 m3 lake fed by a polluted stream having a flow rate of 5.0 m3
/s and po...

Questions in other subjects:

Konu
History, 07.07.2019 08:30