Engineering, 16.03.2022 02:50, mprjug6
what is the minimum bend radius for a 1.0mm thick sheet metal with a tensile reduction of area of 30%
Answers: 1
Engineering, 04.07.2019 18:20, xcapo1x
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Engineering, 06.07.2019 03:20, carrietaylor234
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
what is the minimum bend radius for a 1.0mm thick sheet metal with a tensile reduction of area of 30...
Mathematics, 18.11.2020 22:20
English, 18.11.2020 22:20
Mathematics, 18.11.2020 22:20
Mathematics, 18.11.2020 22:20
Chemistry, 18.11.2020 22:20
Mathematics, 18.11.2020 22:20
English, 18.11.2020 22:20