Engineering, 13.02.2022 14:00, bella7524
a parrot breeder has birds of two colors, blue and green. she finds that 60% of the males are blue if the father was blue and 80% of the males are green if the father was green. write down the transition matrix for the males parrot. what is the probability that a blue male has a blue male after two and three generations?
Answers: 2
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10, rhiannpelham60
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
a parrot breeder has birds of two colors, blue and green. she finds that 60% of the males are blue i...
Computers and Technology, 15.12.2020 14:00
English, 15.12.2020 14:00
English, 15.12.2020 14:00
Chemistry, 15.12.2020 14:00
Business, 15.12.2020 14:00