two circular rods of 50mm diameter are connected by a knuckle joint as shown below, by a pin of 40mm in diameter. if a pull of 120KN acts at each end, find the tensile stress in the rod and shear stress in the pin.

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m