Engineering, 23.12.2021 14:00, ronaldo22

QUESTION: Which scenario illustrates a tolerance stack in the part design?
POSSIBLE ANSWERS:
Operator inexperience with maintaining tool offsets allows the machining to vary widely from
the specifications set forth in a part blueprint, resulting in an unusable part.
Due to a damaged tool, the cutting of a metal part did not meet the tolerance specification set
forth in a blueprint, resulting in a scrapped part.
By chance, the machining of a part met the tolerance specifications set forth in a blueprint, but
a
the accumulation of variation from the upper or lower limits of the tolerance results in an unusable
part.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 04.07.2019 18:20, safiyabrowne7594

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

continue

Engineering, 04.07.2019 19:10, 592400014353

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

continue

Do you know the correct answer?

QUESTION: Which scenario illustrates a tolerance stack in the part design?
POSSIBLE ANSWERS:...