5. water enters a 2.5 cm internal diameter thin copper tube of a heat exchanger at 30C at a rate of 0.3kg/s ans is heated by steam condensing outside at 120 c. if the average heat transfer coefficient is 800 w/m2k, determine the length of the tube required in order to heat the water to 100C

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.